Need testers for dive computer downloader
Re: Need testers for dive computer downloader
I can't send the memory dump for the ICon HD as even zipped it is over 3MB, and this forum won't take anything that big.
Re: Need testers for dive computer downloader
You can send it Jef directly to jefdriesen (at) hotmail (dot) com
Re: Need testers for dive computer downloader
@MRXRAY
Thanks for the portmon logfiles. I'll have a look at them and see if I can decode the new protocol of the Icon HD. For the Nemo Air, I don't need portmon logfiles (because i already know the protocol), only the memory dump and the logfile that are generated by my test application. I think you have confused the two.
And as Sven said, it's easier to send me the files by email.
Thanks for the portmon logfiles. I'll have a look at them and see if I can decode the new protocol of the Icon HD. For the Nemo Air, I don't need portmon logfiles (because i already know the protocol), only the memory dump and the logfile that are generated by my test application. I think you have confused the two.
And as Sven said, it's easier to send me the files by email.
Re: Need testers for dive computer downloader
I have sent the Icon HD file saved from the application via E-Mail, but I can't run universal for the Icon HD as it seems it won't work with any of the formats. What else can I help with? I had already sent the memory dump for the Mares Nemo Air in a previous post. Let me know if you need anything else.
Thanks.
Thanks.
Re: Need testers for dive computer downloader
Any updates? Is this going to be integrated into DL 5.0?
Re: Need testers for dive computer downloader
I have most of the transfer protocol and memory layout reverse engineered. There is only one major piece of information missing, and that's how to locate the dives in the memory dump. I can already do it manually for the data I have, but the method I'm using is very likely to break for other data. Once I have figured that out too, it's ready for use.
You can always help with contributing memory dumps. The "iconhd" test application can be found here: http://www.divesoftware.org/libdc/builds/
Sven told me that an improved downloader for all libdivecomputer supported devices is planned. But for more details, you'll have to ask Sven.
You can always help with contributing memory dumps. The "iconhd" test application can be found here: http://www.divesoftware.org/libdc/builds/
Sven told me that an improved downloader for all libdivecomputer supported devices is planned. But for more details, you'll have to ask Sven.
Re: Need testers for dive computer downloader
BTW, I can also use some more data from Seiko based devices (Cressi, Zeagle, DiveRite, Apeks, Tusa). If you have one of these devices and would like to help, contact me. You can find my email address on the libdivecomputer website. The testing procedure for Seiko devices is more complicated compared to other devices because of driver issues, especially on Windows (Linux and Mac OS X are more easy because there is no conflict with the original Seiko driver).
Re: Need testers for dive computer downloader
Yes, I will add new downloaders in the near future, but unfortunately I cannot tell currently a specific time frame.
Re: Need testers for dive computer downloader
Sorry, I hadn't checked back in a while. I used the ICONHD program to capture these two files. I'm not sure that it's valid data but hopefully helps you. All I get when I run the capture is the handshake, I don't capture any logged data. Do you still need a Portmon or should I just be trying to capture the logs?
Here are the two files I captured....
Here are the two files I captured....
- Attachments
-
- ICONHD.zip
- (199.6 KiB) Downloaded 1464 times
Re: Need testers for dive computer downloader
I didn't make much progress on the iconhd since september. To find the missing info, I would need a dump from an iconhd with really many dives (like a few hundred). The iconhd is a relative new device, so it might be hard to find anyone with enough dives. The fact that it has a large amount of memory (about 1M it seems) doesn't help either. Anyway, I have updated the libdivecomputer library to make the iconhd backend more functional. It's likely to break at some time (with many dives), but it works for now and that's better then nothing
Re: Need testers for dive computer downloader
If anyone is interested, I have created a small graphical application for downloading and visualizing the dive profiles. It's mainly intended for internal testing by myself (so you'll notice it's a quick job), but you can also use it to verify whether there are errors in the decoding of the profile data. Just compare the graphs with those of the manufacturers application and let me know if you spot any errors.
To use it, you'll have to download the gtk runtime first, and extract the zip file somewhere. Then download the downloader zip file, and extract its contents into the bin directory of the gtk runtime. Now you can double click the downloader.exe to start it. Just fill in the portname, choose the correct backend and click OK. The rest should be self explanatory.
To use it, you'll have to download the gtk runtime first, and extract the zip file somewhere. Then download the downloader zip file, and extract its contents into the bin directory of the gtk runtime. Now you can double click the downloader.exe to start it. Just fill in the portname, choose the correct backend and click OK. The rest should be self explanatory.
Re: Need testers for dive computer downloader
I have about 70 dives on the ICONHD, I think I have sent that info. Do you need more from me?
Re: Need testers for dive computer downloader
I got your data and everything looks good, so there is no need to do more at the moment.
Re: Need testers for dive computer downloader
Are we going to see this application added to DiveLog 5.0? If so when?
Re: Need testers for dive computer downloader
It is already used by Diving Log, but not yet for all supported dive computers. I will add more dive computers next year after I've added the features for technical diving.