I've tested also some first uddf export, and found one or two problems:
1) (already emailed, but since i've found another, it's perhaps better to share the list)
when you don't have samples data (for some old dives, i did not synchronise my airX with the memo mouse and lost some dive infos), the export does not show any info about the dive duration. I think It should have <diveduration> (see http://www.streit.cc/extern/uddf30gamma/en/ch09s90.html) at least in this case.
Perhaps in general, it could be a good idea to always add this tag, even if we have <samples>, don't know.
2) even when the gaz used is nitrox, it's exported as 'air':
- in the beggining of the export, only air is defined in <gasdefinitions>:
Code: Select all
<gasdefinitions>
<mix id="air">
<name>air</name>
<o2>0.210</o2>
<n2>0.790</n2>
<he>0.000</he>
<ar>0.000</ar>
<h2>0.000</h2>
</mix>
</gasdefinitions>
Code: Select all
<samples>
<waypoint>
<depth>2.02</depth>
<divetime>0</divetime>
<temperature>300.8</temperature>
<switchmix ref="air" />
</waypoint>
(...)
It's only a small first test, I need to store more infos in divelogs to test the others infos exported.
Regards,
Tom.