Download Suunto Cobra 1

Allgemeines zu Diving Log 6.0 - Fragen und Hinweise
Post Reply
geo2810
Posts: 32
Joined: Thu Mar 31, 2011 20:35

Download Suunto Cobra 1

Post by geo2810 »

Hallo

meine verwendeten zutaten sind
Win 7
Suunto Cobra
Diving Log 5.0.3

ich habe follgendes Phänomen bei der anzeige des Flaschen druckes:

wenn ich mit der Software von Suunto SDM 1.6 meine Cobra auslese bekomme ich die vermutlich korrekten werte des stätig abnehmende flaschendruckes

Image

wenn ich mit Diving Log 5.0.3 meine Cobra mit dem SUUNTO import auslese wird in den Profildaten im Profil 2 nichts eingetragen
ImageImage

wenn ich alledings mit Diving Log 5.0.3 meine Cobra mit dem Downloader (Suunt Cobra) auslese werden in den Profildaten im Profil 2 falsche werte eingetragen
ImageImage

bei die datenübername der altdaten aud dem SDM wurden vermutlich die richtigen werte in Diving Log 5.0.3 übernommen
ImageImage

hat jemand eine erklärung für dieses phänomen?
oder ist das ein bekanntes thema?

bitte um Hilfe
DANKE
lg
geo
geo2810
Posts: 32
Joined: Thu Mar 31, 2011 20:35

Re: Download Suunto Cobra 1

Post by geo2810 »

nachtrag
auch die temperatur kommt nicht korrekt im Diving Log 5.0.3 an
lg
geo
divinglog
Site Admin
Posts: 5768
Joined: Sat Feb 08, 2003 21:02
Location: Coburg
Contact:

Re: Download Suunto Cobra 1

Post by divinglog »

Ist nur eine Vermutung, aber ich denke der Cobra 1 zeichnet Flaschendruck und Temperatur nicht wirklich kontinuierlich auf. Der SDM simuliert das aber, in dem er zwischen den Start- und End-Werten linear interpoliert. Also eigentlich ist das nicht wirklich korrekt. Diving Log macht das mit der Flaschendruck Anzeige rechts neben dem Profil auch, erfindet aber kein lineares Flaschendruckprofil, weil das so eben nur eine Näherung ist.

Zeig mal wie das Flaschendruckprofil von dem SDM importierten Tauchgang in Diving Log ausschaut (die Grafik, nicht die Tabelle). Wenn das eine gerade Linie ist, ist es sehr wahrscheinlich interpoliert.
geo2810
Posts: 32
Joined: Thu Mar 31, 2011 20:35

Re: Download Suunto Cobra 1

Post by geo2810 »

DANKE
sowas in der art habe ich mir bereits gedacht

werde in zukunft mit dem suunto inport auslesen da bleiben die werten im profil 2 eben leer
ist mir lieber wie irgend eine interpolation

die grafik bekommst du nachgeliefert

schönen tag noch
lg
geo
TnT
Posts: 262
Joined: Thu Nov 29, 2007 14:53
Contact:

Re: Download Suunto Cobra 1

Post by TnT »

The Suunto Cobra 1does NOT record any temperature or tank pressure values during the dives. The profile data contains only the temperature and tank pressure before and after the dive, and also the temperature at the maximum depth. SDM cheats by interpolating these values (either linear or with a constant SAC).

You can notice this when you click the recalculate button in the Air Consumption tab. It will ask you whether to simulate or not. Depending on whether you answer yes or no, SDM will interpolate the pressure linearly (and thus a non constant SAC graph), or interpolate the pressure assuming a constant SAC (and thus a non linear pressure graph). Note that SDM will ask this question only once (per dive), and you can't undo your choice as far as I know.

Sorry for answering in English.
libdivecomputer developer
Support the libdivecomputer project with a donation!
http://www.libdivecomputer.org/donate.html
geo2810
Posts: 32
Joined: Thu Mar 31, 2011 20:35

Re: Download Suunto Cobra 1

Post by geo2810 »

Thx
lg
geo
Post Reply