Diving Log 6.0.11 released

A new update for Diving Log 6.0 is now available with the following new features:

  • New Tank Pressure 1-3 Combined profile
  • New Tank Pressure (Calculated) Profile
  • Tank Gauge Improvements
  • Tanklist variables in Report Designer (all tanks)
  • Android MTP Sync in Windows Creators Update fixed
  • Ratio Divelogger 4 Import

If you don’t have an air-integrated dive computer, you can now view a calculated tank pressure profile, based on your SAC rate and depth profile. The result is surprisingly good (I’ve compared numerous recorded and calculated tank profiles). Below you can see a 70m dive with measured tank profile on top and calculated tank profile on bottom:

Measured and calculated tank profile

Here you can see another example of a dive with two tanks (sidemount) and several switches between both tanks. The calculated profile is almost identical to the measured profile of the two tanks:

Calculated tank profile with two tanks

You can see, even without air integrated dive computer you can now get a detailed tank profile in Diving Log. The tank gauge on the right is also using the calculated profile if no tank sensor data is present.

If you are diving with more than one tank pressure sensor, you can now view optionally all 3 tank profiles merged into one graphic:

3 Tank profiles in one graphic

And last but not least you can finally add the data of all tanks in the report designer to your print layouts. The data is provided in the form of several “LogTankList…” variables, which contain each data type (e.g. tank size) of all tanks in form of a list. You can combine them and get a nice table view of all your tanks:

All tanks in the report designer

Tags: , , , ,

2 Responses to “Diving Log 6.0.11 released”

  1. Graggs says:

    Nice work again … Thank you

  2. divinglog says:

    Thank you very much!