Syncing problem after update?

Discussions about Diving Log 6.0 - questions and hints
Post Reply
Buceador
Posts: 63
Joined: Mon Apr 01, 2013 19:46

Syncing problem after update?

Post by Buceador »

Syncing from PC to Ipad gives suddenly a problem. Dialog on PC while syncing sais on "Converting"...

Code: Select all

Search Bonjour devices
Bonjour device found: iPad
Resolve Bonjour devices
Bonjour Hostname: iPad.local.
Bonjour service resolved (1 addresses)
IP: 192.168.xxx.xx
Port: 531xx
Send logbook to iOS device
Executing command 'AccessToSQLite'
Command 'AccessToSQLite' > 'Send'
Executing command 'Send'
Connect to 192.168.xxx.xx:531xx
Send command 'v'
Bonjour device removed: iPad
Any suggestions?

Thanks.
divinglog
Site Admin
Posts: 5768
Joined: Sat Feb 08, 2003 21:02
Location: Coburg
Contact:

Re: Syncing problem after update?

Post by divinglog »

Hi

This is not related to an update, most likely is your firewall blocking Diving Log from syncing (which may be caused by the update). Make sure to allow the Diving Log application to access the network in your firewall settings. Please see here for additional tips and tricks:

https://www.divinglog.de/blog/?page_id=2124

Let me know if you still have problems.

Kind regards,
Sven
Buceador
Posts: 63
Joined: Mon Apr 01, 2013 19:46

Re: Syncing problem after update?

Post by Buceador »

yes, still the same poblem.

Should I reinstall the program?
divinglog
Site Admin
Posts: 5768
Joined: Sat Feb 08, 2003 21:02
Location: Coburg
Contact:

Re: Syncing problem after update?

Post by divinglog »

No, reinstallation won't change anything. Which firewall do you use? Try also to restart your WiFi router by unplugging it from the power for 1 minute.
Buceador
Posts: 63
Joined: Mon Apr 01, 2013 19:46

Re: Syncing problem after update?

Post by Buceador »

Windows Firewall. I turned all three profiles off. Also tried to add a rule for divinglog.exe. I will restart the router and let you know.,

Thanks
Buceador
Posts: 63
Joined: Mon Apr 01, 2013 19:46

Re: Syncing problem after update?

Post by Buceador »

I found the solution. AVG is blokking the communication. I do not have the AVG firewall however. Maybe some other protection which is included. Switching off AVG completely solved the problem.
divinglog
Site Admin
Posts: 5768
Joined: Sat Feb 08, 2003 21:02
Location: Coburg
Contact:

Re: Syncing problem after update?

Post by divinglog »

Great to hear it works now! Maybe there is an option in AVG to whitelist Diving Log, so you don't have to shut it down.
Post Reply