Hi,
I have been using this app with my Dive Systems iDive DAN computer with no issues for several years. Now, all of a sudden I am getting the error DC_STATUS_PROTOCOL, dump file below. As far as I am aware there have been no changes, I have even tried a different cable, but the error remains. It connects via COM6.
INFO: Open: name=COM6
INFO: Configure: baudrate=115200, databits=8, parity=0, stopbits=0, flowcontrol=0
INFO: Timeout: value=1000
INFO: Sleep: value=300
INFO: Purge: direction=3
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=1, data=55
INFO: Read: size=1, data=0C
INFO: Read: size=14, data=10040076BB320100000000062AAF
INFO: Write: size=6, data=5502988DF2B9
INFO: Read: size=1, data=55
INFO: Read: size=1, data=03
INFO: Read: size=5, data=985815A8AF
ERROR: Received NAK packet with error code 58. [in divesystem_idive.c:336 (divesystem_idive_transfer)]
INFO: libdivecomputer-0.dll version: 0.6.0-devel
DC_Status_Protocol error
Re: DC_Status_Protocol error
Hi
Have you installed a firmware update recently to the dive computer? The DiveSystem iX3m received a firware update 4.0 which is causing a similar error. Does the download work with the DiveLogger software?
Kind regards,
Sven
Have you installed a firmware update recently to the dive computer? The DiveSystem iX3m received a firware update 4.0 which is causing a similar error. Does the download work with the DiveLogger software?
Kind regards,
Sven
Re: DC_Status_Protocol error
This error code indicates that there are no dives available. If that's indeed correct, then you won't be able to download dives with the diverlogger application either.silversinker wrote: ↑Thu May 25, 2017 06:12 ERROR: Received NAK packet with error code 58. [in divesystem_idive.c:336 (divesystem_idive_transfer)]
libdivecomputer developer
Support the libdivecomputer project with a donation!
http://www.libdivecomputer.org/donate.html
Support the libdivecomputer project with a donation!
http://www.libdivecomputer.org/donate.html
-
- Posts: 4
- Joined: Wed May 24, 2017 06:51
Re: DC_Status_Protocol error
I have not upgraded the firmware for several months & all was OK after last update
There are 7 dives recorded, so I don't think that is the issue
There are 7 dives recorded, so I don't think that is the issue
Re: DC_Status_Protocol error
Have you tried to download your dives with Ratio's Diverlogger application? How many dives does it download?
libdivecomputer developer
Support the libdivecomputer project with a donation!
http://www.libdivecomputer.org/donate.html
Support the libdivecomputer project with a donation!
http://www.libdivecomputer.org/donate.html
-
- Posts: 4
- Joined: Wed May 24, 2017 06:51
Re: DC_Status_Protocol error
I to have just encountered issues downloading dives having had no issues for several years. The error log is as below:
NFO: Open: name=COM6
INFO: Configure: baudrate=115200, databits=8, parity=0, stopbits=0, flowcontrol=0
INFO: Timeout: value=1000
INFO: Sleep: value=300
INFO: Purge: direction=3
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: libdivecomputer-0.dll version: 0.6.0
NFO: Open: name=COM6
INFO: Configure: baudrate=115200, databits=8, parity=0, stopbits=0, flowcontrol=0
INFO: Timeout: value=1000
INFO: Sleep: value=300
INFO: Purge: direction=3
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: Sleep: value=100
INFO: Write: size=6, data=550210ED0C2E
INFO: Read: size=0, data=
ERROR: Failed to receive the packet start byte. [in divesystem_idive.c:258 (divesystem_idive_receive)]
INFO: libdivecomputer-0.dll version: 0.6.0
Re: DC_Status_Protocol error
Please download the latest libdivecomputer version from here and copy it into the Diving Log program folder:
http://www.libdivecomputer.org/builds/d ... uter-0.dll
Make sure the correct manufacturer (DiveSystem or RATIO) is selected and the correct computer model. Then try to download again.
http://www.libdivecomputer.org/builds/d ... uter-0.dll
Make sure the correct manufacturer (DiveSystem or RATIO) is selected and the correct computer model. Then try to download again.