Perdix AI tank pressure did not import from Shearwater DT

Discussions about Diving Log 6.0 - questions and hints
Post Reply
SwamiMacGyver
Posts: 13
Joined: Tue Nov 15, 2011 01:37

Perdix AI tank pressure did not import from Shearwater DT

Post by SwamiMacGyver »

I downloaded my dive data from my Shearwater Perdix AI into the Shearwater Desktop software. In there, it shows tank pressure. However, when I then imported the dive into Diving Log 6.0, there is no tank pressure. Is this supported? Depth, water temp, NDL, and P02 data all imported ok.

Thanks
-Mike
divinglog
Site Admin
Posts: 5768
Joined: Sat Feb 08, 2003 21:02
Location: Coburg
Contact:

Re: Perdix AI tank pressure did not import from Shearwater D

Post by divinglog »

Hi Mike

Please download this update and extract it into the Diving Log 6.0 program folder (this is not an installer). Make sure that you're using the latest version 6.0.7 before applying this update. After downloading this patch, the tank pressure data should be imported from Shearwater Desktop.

Kind regards,
Sven
SwamiMacGyver
Posts: 13
Joined: Tue Nov 15, 2011 01:37

Re: Perdix AI tank pressure did not import from Shearwater D

Post by SwamiMacGyver »

As always, Sven, you rock! That worked perfectly! This is exactly why I tell everyone who will listen that I use this software :-)

Thanks!
-Mike
divinglog
Site Admin
Posts: 5768
Joined: Sat Feb 08, 2003 21:02
Location: Coburg
Contact:

Re: Perdix AI tank pressure did not import from Shearwater D

Post by divinglog »

Thank you very much, Mike! :)
drhappy
Posts: 2
Joined: Sat Aug 27, 2016 16:01

Re: Perdix AI tank pressure did not import from Shearwater DT

Post by drhappy »

Hi Sven, I just moved up from the non AI Perdix to the AI version myself. Is this update required in version 6.0.8?
divinglog
Site Admin
Posts: 5768
Joined: Sat Feb 08, 2003 21:02
Location: Coburg
Contact:

Re: Perdix AI tank pressure did not import from Shearwater DT

Post by divinglog »

Hi

No, the update is not necessary anymore, it is implemented in 6.0.8. Please note that direct downloading the Perdix AI is still not possible with Diving Log (it will be at some time). At the moment you have to import from Shearwater Desktop.

Kind regards,
Sven
drydoc57
Posts: 2
Joined: Mon Jun 12, 2017 21:16

Re: Perdix AI tank pressure did not import from Shearwater DT

Post by drydoc57 »

Just upgraded to 6.0.9 today as we started our dive trip. No longer getting Perdix AI tank pressures from Shearwater Desktop import. Reverted to an interim upgrade you had suggested in an earlier post an it is OK again.
divinglog
Site Admin
Posts: 5768
Joined: Sat Feb 08, 2003 21:02
Location: Coburg
Contact:

Re: Perdix AI tank pressure did not import from Shearwater DT

Post by divinglog »

The link in the earlier post links now to the latest version (I'm just updating the zip file, the links stays the same). So you're still using 6.0.9 (even a slightly newer build). Can you confirm that from the info dialog?
drydoc57
Posts: 2
Joined: Mon Jun 12, 2017 21:16

Re: Perdix AI tank pressure did not import from Shearwater DT

Post by drydoc57 »

Yes, it was 6.0.9 to which I applied the patch. The help dialogue still shows that as the build number.
Post Reply